美國CTI劍橋公司6800系列振鏡、CTI6800HP、CTI6810P、CTI6850P系列振鏡出售及維修咨詢15990199065顧先生。CTI6810P振鏡維修及供應,美國劍橋(CTI)6850P振鏡出售及維修,CTI6800HP系列振鏡出售及維修
CTI6800HP CTI6810P CTI68580P系列振鏡結合劍橋科技的移動磁鐵驅動器首創的專利技術和我們的雙光位置檢測器的設計。這種組合提供了一個緊湊的高定位速度和精度,降低成本閉環電流計。 CTI6800HP CTI6810P CTI68580P系列掃描系統可以被設計提高系統的速度為目標大小,成本和準確性同典型的光束直徑在3之間毫米,10毫米。
雖然,CTI6800HP CTI6810P CTI68580P系列不推薦看到振為,由于在6200系列的進步,我們的客戶,仍然使用不斷取得成功的CTI6800HP CTI6810P CTI68580P系列g(shù)alvos許多新的設計選型指南。劍橋科技的承諾,客戶滿意度和產品可靠性意味著我們將繼續生產和服務的CTI6800HP CTI6810P CTI68580P系列。
特點
振鏡速度和步驟的快速響應時間:CTI6800HP CTI6810P CTI68580P系列是專門設計用來最大限度地提高系統的高速應用的性能。憑借我們與我們的678伺服驅動器驅動器結合先進的設計,CTI6800HP CTI6810P CTI68580PHP可達1-2在小角度范圍內變動300微秒響應時間步千赫的速度。
保持定位精度,在高速的重復性:CTI的先進的光學定位器提供高定位精度高的速度和可重復性。在與我們的671伺服驅動器的組合,可以達到20 microradians CTI6800HP CTI6810P CTI68580PHP短期重復性。
高系統性能和可靠性隨著時間:高級產品壽命和紀律的設計技術,在軸承技術和質量最好的制造工藝和工藝可靠性。制造質量保證性能的一致性,你需要設計的高品質系統劍橋科技的高標準要求在當今競爭激烈的市場。
Model 6810P Moving Magnet Optical Position Detector Scanner(CTI6810P系列掃描振鏡)
Supports 5 mm apertures.
Galvanometer Specifications
All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up All angles are in mechanical degrees. Consult manual for complete operating instructions.
Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.1 gm*cm2, +/-10%
Torque Constant: 5.7X104 dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110° C
Thermal Resistance (Coil to Case): 2.0° C/Watt, Max
Electrical/Drive Mechanism
Coil Resistance: 3.4 Ohms, +/-10%
Coil Inductance: 160uH, +/-10%
Back EMF Voltage: 0.10mV/degree/sec, +/-10%
RMS Current: 2.6 Amperes at Tcase of 50° C, Max
Peak Current: 12 Amperes, Max
Small Angle Step Response Time: 0.4ms, with balanced load
Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/° C, Maximum
Zero Drift: 0.01 degree/° C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%
Model 6800HP Moving Magnet Optical Position Detector Scanner(CTI 6800HP系列掃描振鏡)
Supports 3 mm apertures
Galvanometer Specifications
All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up All angles are in mechanical degrees. Consult manual for complete operating instructions.
Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.018 gm*cm2, +/-10%
Torque Constant: 2.5X104 dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110°C
Thermal Resistance (Coil to Case): 4.0°C/Watt, Max
Electrical/Drive Mechanism
Coil Resistance: 4.2 Ohms, +/-10%
Coil Inductance: 96uH, +/-10%
Back EMF Voltage: 0.04mV/degree/sec, +/-10%
RMS Current: 1.6 Amperes at Tcase of 50°C, Max
Peak Current: 6 Amperes, Max
Small Angle Step Response Time: 0.3ms, with balanced load
Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/°C, Maximum
Zero Drift: 0.01 degrees/°C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%
Model 6850P Moving Magnet Optical Position Detector Scanner(CTI 6850P系列掃描振鏡)
Supports 10mm apertures
Galvanometer Specifications
All position detector specifications apply with Cambridge Technology servo driver after a 30-second warm-up. All angles are in mechanical degrees. Consult manual for complete operating instructions.
Mechanical
Rated Angular Excursion: 40°
Rotor Inertia: 0.5 gm*cm2, +/-10%
Torque Constant: 9.5X104dyne-cm/amp, +/-10%
Maximum Coil Temperature: 110° C
Thermal Resistance (Coil to Case): 1.5° C/Watt, Max
Electrical/Drive Mechanism
Coil Resistance: 1.5 Ohms, +/-10%
Coil Inductance: 160uH, +/-10%
Back EMF Voltage: 0.16mV/degree/sec, +/-10%
RMS Current: 4.3 Amperes at Tcase of 50°C, Max
Peak Current: 25 Amperes, Max
Small Angle Step Response Time: 0.5ms, with balanced load
Position Detector
Linearity: 98%, Minimum, over 30 degrees
Scale Drift: 0.05 %/° C, Maximum
Zero Drift: 0.01 degree/° C, Maximum
Repeatability, Short Term: 20 microradians
Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20%
Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20%
美國Cambrage Technology Inc (CTI)生產的各類高速光學掃描振鏡,體積小,響應速度快,特別適合激光打標、舞臺燈光等應用。
轉載請注明出處。